Afbeelding kan van origineel afwijken.
Aqueous IFD 10/pk
Bestel-nr.: 67265002A
Prijs op aanvraag Voor 1 stuk(s) (minimum afname: 10 stuk(s))
- Artikel-nr: 6726-5002A
- Verpakking: 10 stuk(s)
- Geldigheid: 31.12.2024
- Laatste update: 31.12.2023
Aqueous InLine Filter/Degasser (IFD), 0.2 µm, 50 mm, nylon Aqueous IFD is a Polypropylene inline filter/degassers (IFD) which connects directly into an HPLC line to simultaneously filter and degas the mobile phase as it is being used. The Aqueous IFD provides pure filtration of aqueous based HPLC mobile phases. Faster than traditional methods of mobile phase preparation, saving time in the laboratory. Enhanced laboratory safety. No need to purchase expensive degassing equipment. Rugged, chemically resistant polypropylene construction. Air vent on inlet with luer lock cap. Integritytestable (bubble point method). The Aqueous IFD is designed to work with mobile phases containing at least 20% of the aqueous component. It has a 0.2 µm hydrophilic nylon membrane for use with aqueousbased mobile phases. They have a polypropylene housing, the circumference of which is sealed by a security ring, fittings to accommodate 1?16”1?8” tubing, and an air vent on the inlet with luer lock cap to enable priming. The inline filters work on the principle of "bubble point" – the point of pressure at which gases will pass through a wet membrane. If pressure is maintained below the bubble point, the gas will not pass through the membrane and is trapped by the particular filter device.
Description | waarde |
---|---|
Netto gewicht: | 257 g |
Description | waarde |
---|---|
Douanenummer: | 84212980 |
Land van oorsprong: | United kingdom |
Bruto gewicht: | 234 g |
Breedte verpakking: | 70 mm |
Hoogte verpakking: | 70 mm |
Diepte verpakking: | 280 mm |
Transport temperatuur: | Room Temperature |
Bewaartemperatuur: | Room Temperature |