CO2 Incubator ICO50med, 56l, 18-50°C, CO2 control 0-20%

CO2 Incubator ICO50med, 56l, 18-50°C, CO2 control 0-20%
Afbeelding kan van origineel afwijken.
 
Bestel-nr.: ICO50med Prijs op aanvraag Voor 1 stuk(s)
CO2 Incubator ICO50med, TwinDISPLAY, 56 l, working-temperature range 5 °C above ambient temperature to 50 °C, setting range 18 °C to 50 °C, with CO2 control - with dual beam NDIR system - adjustable from 0 % - 20 %, humidity limitation by a Peltier element, when water dish is full and inserted, the Peltier element limits the value of relative humidity in the interior to 93 % rh +/- 2,5 %, electronic microprocessor temperature controller with Pt100 and auto-diagnostic system, fully insolated stainless steel door and heated inner glass door, all-round heating on 6 sides, stainless steel housing and interior; with 1 water dish, with 1 stainless steel shelf; multiple overtemperature protection/undertemperature alarm, standard sterilisation programme; works calibration certificate at +37 °C, 5 % CO2; textured stainless steel exterior: 559 x 795 x 521 mm; stainless steel interior: 400 x 425 x 330 mm; voltage: 230 V, 50/60 Hz; max. electrical load: approx. 1000 W
meer
(-) Technical data:
Nominaal volume: 56 l
Minimum bedrijfstemperatuur: 25 °C
Maximum bedrijfstemperatuur: 50 °C
Netto gewicht: 55 kg
(-) Export-related data:
Douanenummer: 84198998 Niet in de actuele lijst
Land van oorsprong: Germany
Regio van oorsprong: Beieren
Bruto gewicht: 74 kg
Dubbel gebruik verklaring: Nee
Breedte verpakking: 0,73 m
Hoogte verpakking: 0,95 m
Diepte verpakking: 0,64 m
Volume verpakking: 0,443m³

Toebehoren:

  • ICO50medB04714
    External measuring instrument with additional measuring head for temperature and
  • ICO50medB29744
    Stacking set (4 pcs) for stacking of appliances of same size
  • ICO50medB33170
    USB User-ID stick (with User-ID licence): Oven-linked authorisation licence (Use
  • ICO50medB33504
    Subframe (622 mm high) adjustable in height (sizes 150/240: should not be used f
  • ICO50medB33507
    Subframe (130 mm high); sizes 150/240: only in combination with the correspondin
  • ICO50medB38737
    Water dish
  • ICO50medB38739
    HEPA-filter for chamber (filter class E11) according to EN 1822, packed in steri
  • ICO50medB44128
    IVF-module for ICO50med: patented consisting of 6 slide-in units, a total of 12
  • ICO50medD00124
    IQ document with device-specific works test data, OQ/PQ check list as support fo
  • ICO50medD38897
    IQ/OQ document with device-specific works test data for one free-selectable CO
  • ICO50medD38898
    IQ/OQ document with device-specific works test data for one free-selectable CO
  • ICO50medE02087
    CO2 pressure reducing valve to DIN 8546, incl. gas cylinder monitor
  • ICO50medE06162
    N2 pressure reducing valve to DIN EN ISO 2503, incl. gas cylinder mon
  • ICO50medE06189
    Ethernet connection cable 5 m for computer interface
  • ICO50medE06192
    USB-Ethernet adapter
  • ICO50medE35160
    Perforated stainless steel shelf
  • ICO50medE36651
    Magnetic foil, can be labelled with a non-permanent board marker (only in combin
  • ICO50medE37026
    Holder for Petri dishes round (only in combination with IVF-module)
  • ICO50medE37069
    Holder for test tube (only in combination with IVF-module)
  • ICO50medE37308
    Holder for Petri dishes square (only in combination with IVF-module)
  • ICO50medFDAQ1
    FDA confroming software AtmoCONTROL (FDA edition). Meets the requirements for th
  • ICO50medFDAQ2
    Integration of additional units (up to max. 15 units) into an already existent F
  • ICO50medGA3Q5
    Guarantee extension by 1 year
  • ICO50medZWVR6
    Central water supply, with filter cartridges for connection to the domestic wate
  • ICO50medZWVR7
    Central water supply, without filter cartridges for connection to the domestic w

 

Optie:

  • ICO50medB8
    Door hinged on the left
  • ICO50medC2
    Battery-buffered ControlCOCKPIT: Uninterrupted supply for the entire display uni
  • ICO50medC3
    MobileALERT, notification by SMS in case of any error or alarm of the device. Re
  • ICO50medC4
    MobileALERT for up to 4 alarm notifications; temperature and CO2 alar
  • ICO50medD00106
    Works calibration certificate for 5 %, 7 % and 10 % CO2 (measured at
  • ICO50medD00131
    Works calibration certificate for one (freely selectable) temperature, humidity
  • ICO50medD00143
    Works calibration certificate for one (freely selectable) temperature, humidity,
  • ICO50medF7
    Entry port (silicone), 40 mm clear diameter, moisture tight, can be closed by si
  • ICO50medH5
    Potential-free contact (24 V/2 A) with socket to NAMUR NE 28 for external monito
  • ICO50medH6
    Potential-free contact for combination error message (e.g. supply failure, senso
  • ICO50medK5
    Peltier cooling unit enables a working temperature of 37 °C even at higher ambie
  • ICO50medK6
    Capacitive humidity sensor for measuring and displaying the relative humidity
  • ICO50medK7
    Active microprocessor control for humidifying and dehumidifying (40 - 97 % rh),
  • ICO50medK9
    Start-up of ICOmed incubators and brief training (D, A, CH only), through Memmer
  • ICO50medT1
    Two gas connections with quick release connectors for automatic switch-over of g
  • ICO50medT2
    Electropolished interior
  • ICO50medT6
    Control of oxygen concentration by N2 inlet; adjustment range 1 % up
  • ICO50medV1
    4 - 20 mA current loop interface O2 controller, actual value (0 to 25
  • ICO50medV3
    4 - 20 mA current loop interface Temperature controller, actual value (0 to +70
  • ICO50medV7
    4 - 20 mA current loop interface Humidity controller, actual value (0 to 100 % r
  • ICO50medV9
    4 - 20 mA current loop interface CO2 controller, actual value (0 to 2
  • ICO50medX2
    Voltage 115 V, 50/60 Hz