Afbeelding kan van origineel afwijken.
Heating sleeve for MyFerm 10 litre cell culture flask
Bestel-nr.: L14020T820
Prijs op aanvraag Voor 1 stuk(s)
- Artikel-nr: L14020T820
- Groep: Verwarmingsbanden, verwarmingslinten
Toon alle Verwarmingsbanden, verwarmingslinten van Landgraf HLL - Trefwoordlijst alfabetisch: heating ribbons
- Geldigheid: 31.03.2027
- Laatste update: 31.03.2026
- Vergelijkbare producten: tonen (6)
Heating sleeve for MyFerm reaction vessels
The heating sleeve enables uniform, constant and homogeneous temperature control of the fermenter via the outer jacket,
without the need for complex double-walled vessels. The temperatures are freely selectable so that a variety of operating conditions can be simulated.
Heating capacity approx. 800 W, 230V AC
With PT-100 sensor (permanently installed)
Cables: 1.5 m, connection diode plug for PT-100
For vessel diameter: approx. 230 mm, volume 10 litres
Sleeve: H 210 mm * L 690 mm
Temperature range: +30 degrees-+70 degrees
Necessary control unit: L14020TER
The heating sleeve enables uniform, constant and homogeneous temperature control of the fermenter via the outer jacket,
without the need for complex double-walled vessels. The temperatures are freely selectable so that a variety of operating conditions can be simulated.
Heating capacity approx. 800 W, 230V AC
With PT-100 sensor (permanently installed)
Cables: 1.5 m, connection diode plug for PT-100
For vessel diameter: approx. 230 mm, volume 10 litres
Sleeve: H 210 mm * L 690 mm
Temperature range: +30 degrees-+70 degrees
Necessary control unit: L14020TER
| Beschrijving | waarde |
|---|---|
| Douanenummer: | 85168020 |
| Land van oorsprong: | Germany |
| Beschrijving | waarde |
|---|---|
| WEEE obligation: | Nee |
Electronic temperature controller Electronic laboratory controller, table-top unit, freely...