LAUDA Puridest PD 8 D Water still 400 V; 3/N/PE; 50/60 Hz

LAUDA Puridest PD 8 D
Water still 400 V; 3/N/PE; 50/60 Hz

Features:
Water Still (fully automatic) for double distillation, suitable for both bench and wall mounting
Main switch with pilot lamp for the monitoring of both distillation stages at the front of the unit
Valve made of Borosilicate glass 3.3 with PTFE plunger for single distillate
Outlet with dust guard shield made of Borosilicate glass 3.3 for double distillate
Condenser (cooling coil) 1st stage made of stainless steel
Condenser (cooling coil) 2nd stage including the baffle made of DURAN® Borosilicate glass 3.3.
Solenoid valve to control the water supply
Water saving through automatic water cut-off. Unnecessary water consumption will be avoided.
Evaporator easily accessible for cleaning purposes.
CO2 degassing through outlet in the condenser.
Electronic contamination monitoring of the still with distillation stop and visual cleaning instruction
Electronic level control during the whole distilling process.
Double-action low water cut-off through float switch and thermostatic safety switch.
Heating element and evaporator made of stainless steel.
Housing made of galvanised sheet steel, powder coated
Double-walled housing

Options included:
With external level switch for monitoring the filling level of a separate storage tank
With separate water supply, to feed the evaporator with pretreated water, connector for hose 1/2"

Technical Features:
Conductivity stage 1 /25 °C: 2.2 µS/cm
Conductivity stage 2 /25 °C: 1.6 µS/cm
Production output: 8 L/h
Heater power max.: 11.5 kW
Power consumption max.: 11.5 kW
Cooling water flow rate: 3.3 L/min
Pressure difference cooling water min.: 3 bar
Maximal pressure cooling water: 7 bar
Water cooling inlet for hose: 1/2 "
Overall dimensions (WxDxH): 700 x 390 x 700 mm
Weight: 50 kg
Ambient temperature range: 10 ... 40 °C
Power supply: 400 V; 3/N/PE; 50/60 Hz
Power plug: Power cord with plug (IEC 60309, 5-pol, CEE, red, 16 A)