Heating tape PILZ® WBQ silicate fibre insulated 1050W length 3m Tmax. 90

Heating cable PILZ® WBQ (350W/m) silicate fibre insulated 1.050W, length 3,0m, Tmax. 900°C 230V, connecting cable 0,4m

Operation together with a temperature controller is always recommended.

Technical Data/Structure
- Two heating spirals arranged in parallel 
- Silicate fibre insulated heating cable 
- Outer braid: flexible silicate fibre
- Without protective conducter
- Nominal voltage: 230 VAC
- Mains connection: ready for connection 0,4m
- Construction type: not moisture resistant 
- Dimensions: 30 x 8,0 mm
- Min. bending radius: > 10 mm

Application
In laboratories and experimental facilities where an easily employed system is 
desired to heat shapes and parts to high temperatures or where it is important 
to ensure short heating-up periods. 

Advantages
- very high and constant heating power output per meter 
- high operating temperature
- extremely flexible
- quick and easy installation 
- cost effective

Please note:
- the high power output (W/m) requires a good heat-transfer 
  contact with the object to be heated. 
- to avoid overheating, heating tapes or cables must installed in such 
  a way that they are not in contact with each other or overlapping.
- the surface temperature of the switched on heating system 
  is always higher than the pipe temperature.
- series resistance heating cables and tapes must be operated 
  with a temperature controller

Operation together with a temperature controller is always recommended.
old item number: WBQ00901-230XX900-03001050