Memosens CLL47E Four-electrode conductivity sensor Wide

Afbeelding kan van origineel afwijken.

The Memosens 2.0 conductivity sensor CLL47E is a four-electrode conductivity sensor with stainless steel, ceramic and platin is designed for laboratory and sample measurement in the field with wide measuring range.

Thanks to Memosens technology, the sensors provide reliable, highly accurate measurements with a fast response time.

The inductive Memosens coupling between the corresponding Memosens sensor and the mobile CML18 handheld device is insensitive to moisture and corrosion.

The Memosens technology is based on a true plug-and-play principle. Just connect the sensor and you are ready to start your measurements. Measured values, calibration data and history are stored directly in the sensor. This means status values can be read out and a sensor check is also possible. An excellent feature to boost your GLP.

All sensors are supplied pre-calibrated. Thus, they are directly ready for use for your random sample measurement when the corresponding sensor is connected to the associated mobile handheld device Liquiline Mobile CML18.
Description waarde
Benoeming producttype: Leitfähigkeit
Geregistreerd handelsmerk: CLL47E®
Diameter: 12 mm
Lengte: 120 mm
Uitvoering temperatuurvoeler: PT 1000
Parameter: Geleidbaarheid
Geïntegreerde temperatuurvoeler: Ja
Netto gewicht: 100 g
Temperaturesensor type: PT-1000
Sensor signal : Digitaal
Aansluiting: Stekker-kop
Automatic sensor identification: Ja
Description waarde
Douanenummer: 90279000
Land van oorsprong: Germany
Regio van oorsprong: Baden-Württemberg
Bruto gewicht: 220 g
Description waarde
WEEE obligation: Ja
WEEE registration number: DE65437134
WEEE brand according to EAR register: Endress+Hauser (Deutschland) GmbH+ Co.KG
WEEE type of equipment: Small equipment for use in other than private households only
Liquiline Mobile CML18 (Multiparameter for pH, DO, conductivity) Test the Liquiline Mobile CML18...

Liquiline Mobile CML18 (Multiparameter for pH, DO, conductivity) Test the Liquiline Mobile CML18...

Sensor protection The sensor protection protects the connected sensors on the Liquiline Mobile...

Conductivtiy calibration solution CLY11-A (74 µS/cm), 500 ml With the calibration solution CLY11,...

Conductivtiy calibration solution CLY11-B (149,6 µS/cm), 500 ml With the calibration solution...

Conductivtiy calibration solution CLY11-C (1,406 mS/cm), 500 ml With the calibration solution...

Conductivtiy calibration solution CLY11-D (12,64 mS/cm), 500 ml With the calibration solution...

Conductivtiy calibration solution CLY11-E (107 mS/cm), 500 ml With the calibration solution...

Digital Memosens process cable CYK10 (3,0 m) CYK10 is a robust data cable for process...

Digital Memosens process cable CYK10 (5,0 m) CYK10 is a robust data cable for process...

Digital Memosens process cable CYK10 (10 m) CYK10 is a robust data cable for process measurements...

Digital measuring cable with Memosens plug CYK20; 1,5 m CYK20 is a flexible data cable allowing...

Digital measuring cable with Memosens plug CYK20; 3,0 m CYK20 is a flexible data cable allowing...

Liquiline Mobile CML18 Fieldcase With the fieldcase, it is possible to store and transport the...

Liquiline Mobile CML18 SET pH basic Liquiline Mobile CML18, pH sensor CPL51E, CML18 protective...

Liquiline Mobile CML18 SET pH rugged Liquiline Mobile CML18, pH sensor CPL59E, CML18 protective...

Liquiline Mobile CML18 SET pH Pro Liquiline Mobile CML18, pH sensor CPL51E, CML18 protective...

Liquiline Mobile CML18 SET pH/DO Pro Liquiline Mobile CML18, pH sensor CPL51E, oxygen sensor...

Liquiline Mobile CML18 SET pH/Cond/DO Liquiline Mobile CML18, pH sensor CPL51E, conductivity...

Liquiline Mobile CML18 SET pH/Cond Liquiline Mobile CML18, pH sensor CPL51E, conductivity sensor...