Afbeelding kan van origineel afwijken.
digital Concrete Tester PCE-HT 224E
Dangerous good (shipping)
Bestel-nr.: PCEHT224E
Prijs op aanvraag Voor 1 stuk(s)
- Artikel-nr: PCE-HT 224E
- Groep: Andere laboratoriumuitrustingen
Toon alle Andere laboratoriumuitrustingen van PCE Instruments - Geldigheid: 31.12.2026
- Laatste update: 16.02.2026
Hardness Tester PCE-HT 224E with Digital DisplayMechanical concrete hardness tester with OLED / Measuring range 10 ... 100 N/mm² (1500 ... 8500 PSI or lbs/in²) / Built-in battery for mobile use / Test load 2.207 J / For measuring the quality of concrete surfaces
The Hardness Tester is a measuring tool for testing the strength of concrete. The Hardness Tester measures strength according to the Schmidt principle. According to this measurement method, the quality of concrete can be measured with the Hardness Tester. Thus, the Hardness Tester finds its essential application in the construction and in the construction sector. The Hardness Tester is also suitable for measuring the hardness of rolled paper. The built-in mechanism on the hardness tester always ensures the same impact energy of 2.207 Nm.
The Hardness Tester displays measurements Rebound Value and can display force in PSI, MPa, kgF/cm², or N/mm². The Hardness Tester can be setup to measure at test angles of downward(-90°), downward(-45°), horizontal (0°), upward(45°), or upward(90°).
The Hardness Tester is a measuring tool for testing the strength of concrete. The Hardness Tester measures strength according to the Schmidt principle. According to this measurement method, the quality of concrete can be measured with the Hardness Tester. Thus, the Hardness Tester finds its essential application in the construction and in the construction sector. The Hardness Tester is also suitable for measuring the hardness of rolled paper. The built-in mechanism on the hardness tester always ensures the same impact energy of 2.207 Nm.
The Hardness Tester displays measurements Rebound Value and can display force in PSI, MPa, kgF/cm², or N/mm². The Hardness Tester can be setup to measure at test angles of downward(-90°), downward(-45°), horizontal (0°), upward(45°), or upward(90°).
| Beschrijving | waarde |
|---|---|
| Totale lengte: | 280 mm |
| Maximum bedrijfstemperatuur: | 40 °C |
| Werking op batterij: | Nee |
| Spanningsbron: | MYD217 |
| Netto gewicht: | 2,26 kg |
| Netto gewicht: | 2,26 kg |
| Breedte: | 75 mm |
| Hoogte: | 60 mm |
| EAN Code: | 4250348721402 |
| EAN Code: | 4250348721402 |
| Draagbaar toestel: | Nee |
| Gekalibreerd / gecertificeerd: | Nee |
| AC power plug: | Europlug (type C) |
| Beschrijving | waarde |
|---|---|
| UN-nummer: | 38,3 |
| UN-nummer: | 38,3 |
| Beschrijving | waarde |
|---|---|
| Douanenummer: | 90248000 |
| Douanenummer: | 90248000 |
| Land van oorsprong: | China |
| Land van oorsprong: | China |
| Bruto gewicht: | 2,357 kg |
| Bruto gewicht: | 2,357 kg |
| Breedte verpakking: | 0,2200 m |
| Breedte verpakking: | 0,0750 m |
| Hoogte verpakking: | 0,06 m |
| Hoogte verpakking: | 0,0900 m |
| Diepte verpakking: | 0,3700 m |
| Diepte verpakking: | 0,3700 m |
| Volume verpakking: | 0,0073 m³ |
| Volume verpakking: | 0,0073 m³ |
| Transport temperatuur: | -4 - 40 °C |
| Transport temperatuur: | -4 - 40 °C |
| Bewaartemperatuur: | -4 - 40 °C |
| Bewaartemperatuur: | -4 - 40 °C |
| Beschrijving | waarde |
|---|---|
| WEEE obligation: | Ja |
| WEEE obligation: | Ja |
| WEEE registration number: | DE69278128 |
| WEEE registration number: | DE69278128 |
| WEEE brand according to EAR register: | PCE |
| WEEE brand according to EAR register: | PCE |
| WEEE type of equipment: | Small equipment, that can be used in private households |
| WEEE type of equipment: | Small equipment, that can be used in private households |