• Home
  • Geschiedenis

    • Artikellijst van de producent: PCE Instruments


    First letters:


    Art. nr. Omschrijving prijs
    Vorschau
    		PCE1274 DIN Flow Cup PCE-127/4

    DIN flow cup meters are viscosity meters to determine the viscosity of liquids. The flow cups are often used in industry and research laboratories. Due to the form of the measuring method, however, the determination is only carried out on low-viscosity liquids, since the...    		 Prijs op aanvraag Voor
    1 stuk(s)
    Vorschau
    		PCE1274P DIN Flow Cup PCE-127/4P

    DIN flow cup meters are viscosity meters to determine the viscosity of liquids. The flow cups are often used in industry and research laboratories. Due to the form of the measuring method, however, the determination is only carried out on low-viscosity liquids, since the...    		 Prijs op aanvraag Voor
    1 stuk(s)
    Vorschau
    		PCECM40 Digital Clamp PCE-CM 40

    The flexible current clamp PCE-CM 40 is suitable for current measurements up to 3000 A AC. In addition to TRMS current measurement, the flexible current clamp can be used to measure inrush currents. The measurement of the current takes place via a flexible Rogowski coil. This...    		 Prijs op aanvraag Voor
    1 stuk(s)
    Vorschau
    		PCECM40ICA Digital Clamp PCE-CM 40-ICA

    The flexible current clamp PCE-CM 40 is suitable for current measurements up to 3000 A AC. In addition to TRMS current measurement, the flexible current clamp can be used to measure inrush currents. The measurement of the current takes place via a flexible Rogowski coil....    		 Prijs op aanvraag Voor
    1 stuk(s)
    Vorschau
    		PCECM6 digital Clamp Meter PCE-CM 6

    The digital clamp meter is a multifunctional meter for the precise measurement of alternating and direct voltage as well as alternating current that can be measured without direct contact to the line. The digital clamp meter is suitable for measuring resistance,...    		 Prijs op aanvraag Voor
    1 stuk(s)
    Vorschau
    		PCECM7 Digital Clamp Meter PCE-CM 7

    The digital clamp meter is a multifunctional meter for the precise measurement of alternating and direct voltage as well as alternating and direct current that can be measured without direct contact to the line. The digital clamp meter is suitable for measuring...    		 Prijs op aanvraag Voor
    1 stuk(s)
    Vorschau
    		PCECOM20 Digital Conductivity Meter PCE-COM 20

    PCE-COM 20 is a portable handheld non-destructive material tester for non-ferrous metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper.Featuring an...    		 Prijs op aanvraag Voor
    1 stuk(s)
    Vorschau
    		PCECOM20ICA Digital Conductivity Meter PCE-COM 20-ICA

    PCE-COM 20 is a portable handheld non-destructive material tester for non-ferrous metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper.Featuring an...    		 Prijs op aanvraag Voor
    1 stuk(s)
    Vorschau
    		PCECTI10 Digital Clamp PCE-CTI 10

    The clamp meter is the ideal measuring device for measuring voltages up to 1500 V AC/DC and currents up to 1000 A AC/DC. The current measurement with the clamp meter is inductive. To do this, the supply line is placed in the clamp meter. This has the particular advantage...    		 Prijs op aanvraag Voor
    1 stuk(s)
    Vorschau
    		PCECTI10ICA Digital Clamp PCE-CTI 10-ICA

    The clamp meter is the ideal measuring device for measuring voltages up to 1500 V AC/DC and currents up to 1000 A AC/DC. The current measurement with the clamp meter is inductive. To do this, the supply line is placed in the clamp meter. This has the particular advantage...    		 Prijs op aanvraag Voor
    1 stuk(s)
    Vorschau
    		PCEDAT500 Digital Adhesion Tester PCE-DAT 500

    The digital adhesion tester is a portable, hand-operated device that measures the force required to pull a specific test diameter of coating from a substrate using hydraulic force. The measured force is shown on the LCD and represents the adhesion strength of the...    		 Prijs op aanvraag Voor
    1 stuk(s)
    Vorschau
    		PCEDBC650 Dry Block Temperature Calibrator PCE-DBC 650

    Dry Block Temperature Calibrator PCE-DBC 650    		 Prijs op aanvraag Voor
    1 stuk(s)
    Vorschau
    		PCEDC25 Digital Clamp PCE-DC 25

    The clamp meter has a measuring range of 0… 1000 A AC/DC. The current is measured inductively using the clamp on the measuring device. Live supply lines with a diameter of up to 32 mm (1.2") can be connected to the clamp meter. With the optional Rogowski coil, the measuring...    		 Prijs op aanvraag Voor
    1 stuk(s)
    Vorschau
    		PCEDC41 Digital Clamp Meter PCE-DC 41

    The clamp meter PCE-DC 41 can measure voltages up to 600 V, currents up to 600 A and electrical resistance up to 1000 ?. To perform a measurement, you can either use the measuring leads, which are included in the package of the clamp meter, or you can use the integrated...    		 Prijs op aanvraag Voor
    1 stuk(s)
    Vorschau
    		PCEDC41ICA Digital Clamp Meter PCE-DC 41-ICA

    The clamp meter PCE-DC 41 can measure voltages up to 600 V, currents up to 600 A and electrical resistance up to 1000 ?. To perform a measurement, you can either use the measuring leads, which are included in the package of the clamp meter, or you can use the...    		 Prijs op aanvraag Voor
    1 stuk(s)
    Vorschau
    		PCEDC50 Digital Clamp PCE-DC 50

    The clamp meter PCE-DC 50 is a measuring device for measuring currents of up to 1000 A AC / DC. In addition to current measurement, the clamp can also measure and test voltage, frequency, duty cycle, resistance, continuity test, capacitors and diodes. The enclosure diameter...    		 Prijs op aanvraag Voor
    1 stuk(s)
    Vorschau
    		PCEDC50ICA Digital Clamp PCE-DC 50-ICA

    The clamp meter PCE-DC 50 is a measuring device for measuring currents of up to 1000 A AC / DC. In addition to current measurement, the clamp can also measure and test voltage, frequency, duty cycle, resistance, continuity test, capacitors and diodes. The enclosure...    		 Prijs op aanvraag Voor
    1 stuk(s)
    Vorschau
    		PCEDC1 Digital Clamp PCE-DC1

    The Mini Clamp Meter has been designed to detect, indirectly, AC/DC current and frequency. The Clamp Meter has one white LED integrated to allow for the point of measurement to be illuminated, and a function to test the voltage without contact. The reduced dimensions of this...    		 Prijs op aanvraag Voor
    1 stuk(s)
    Vorschau
    		PCEDC2 Digital Clamp PCE-DC2

    The PCE-DC1 Clamp Meter has been designed to detect, indirectly, AC/DC current and ohms. The Clamp Meter has white LEDs integrated to allow for the point of measurement to be illuminated, and a function to test the voltage without contact. The reduced dimensions of this device...    		 Prijs op aanvraag Voor
    1 stuk(s)
    Vorschau
    		PCEDC3 Digital-Clamp PCE-DC3

    This clamp meter was developed for the indirect measurement of AC/DC currents with high resolution. A non-contact voltage tester function and a torch/flashlight for illuminating the measuring point have also been integrated into this clamp meter. The small dimensions of this...    		 Prijs op aanvraag Voor
    1 stuk(s)
    Vorschau
    		PCEDDA Digital Durometer PCE-DD-A

    The PCE-DD-A Durometer is an ergonomic device that checks Shore hardness in gum, plastic and other non-metallic materials. The PCE-DD-A Durometer is used primarily for soft gums, elastomers, natural rubber, neoprenes, casting resin, white PVC, leather, etc. If the material...    		 Prijs op aanvraag Voor
    1 stuk(s)
    Vorschau
    		PCEDDA10 Digital Durometer PCE-DDA 10

    The PCE-DDA 10 Shore A durometer is a portable handheld device used to check Shore A hardness in soft gums, elastomers, natural rubber, neoprenes, casting resin, white PVC, leather, etc. This digital durometer has a reading accuracy of 0.1 hardness units. The durometer...    		 Prijs op aanvraag Voor
    1 stuk(s)
    Vorschau
    		PCEDDA10ICA Digital Durometer PCE-DDA 10-ICA

    The PCE-DDA 10 Shore A durometer is a portable handheld device used to check Shore A hardness in soft gums, elastomers, natural rubber, neoprenes, casting resin, white PVC, leather, etc. This digital durometer has a reading accuracy of 0.1 hardness units. The...    		 Prijs op aanvraag Voor
    1 stuk(s)
    Vorschau
    		PCEDDD Digital Durometer PCE-DD-D

    PCE-DD-D is a Shore D durometer or material hardness tester used to measure the Shore hardness of materials such as hard rubber, hard resin, acrylic, glass, thermoplastic and more. This Shore D hardness tester uses an impact rod with a 30º conical point and 50 Newtons (N)...    		 Prijs op aanvraag Voor
    1 stuk(s)
    Vorschau
    		PCEDDD10 Digital Durometer PCE-DDD 10

    The PCE-DDD 10 Shore D durometer is a portable handheld device used to check Shore D hardness in hard rubber and thermoplastic. This digital durometer has a reading accuracy of 0.1 hardness units. The durometer comes manufacturer calibrated and can be optionally...    		 Prijs op aanvraag Voor
    1 stuk(s)